Filter
Top Products
88
Your camcorder goes forward or backward to automatically stop at a desired scene
having a tape counter value of “0:00:00”. Use the Remote Commander for this
operation.
(1) In the playback, press DISPLAY when the tape counter does not appear.
(2) Press ZERO SET MEMORY at the point you want to locate later. The tape
counter shows “0:00:00” and then starts counting. The ZERO SET MEMORY
indicator flashes.
(3) Press x when you want to stop playback.
(4) Press m to rewind the tape to the tape counter’s zero point. The tape stops
automatically when the tape counter reaches approximately zero. The ZERO
SET MEMORY indicator disappears, and the time code appears.
(5) Press N. Playback starts from the counter’s zero point.
Notes
•When you press ZERO SET MEMORY before rewinding the tape, the zero set memory
will be canceled.
•There may be a discrepancy of several seconds from the time code.
•The ZERO SET MEMORY indicator disappears when you press FN.
If a tape has a blank portion between recorded portions
The zero set memory may not work correctly.
Quickly locating a scene
– ZERO SET MEMORY
ZERO SET MEMORY
DISPLAY
m
x
N