Sony DPF-V900/V700 Digital Photo Frame User Manual


 
38
GB
Using an external device
Using a Bluetooth
device
You can connect a Bluetooth adaptor (optional)
to the USB A connector of the photo frame and
transfer images from a Bluetooth compatible
mobile phone or other device. The transferred
images are saved to internal memory.
1 Connect the photo frame to the AC
power source. (.page 17)
2 Press 1 (on/standby) on the photo
frame to turn on the power.
3 Connect the Bluetooth adaptor
(optional) to the USB A connector.
4 Transfer the images to the photo
frame by performing operations from
the mobile phone.
Transferring images
from an external device
You can connect a digital camera, USB
memory, or photo storage with support for
mass storage to the photo frame and transfer
images.
Notes
Compatibility with all external devices is not
guaranteed.
If an external device is connected to the USB A
connector on the photo frame, the photo frame
cannot read the images in card media. Disconnect
an external device, if you need.
1 Connect the photo frame to the AC
power source. (.page 17)
2 Set the digital camera or external
device to mass storage connection
mode.
The setting and operation method before
connecting differ depending on the digital
camera or external device. Refer to the
operating instructions supplied with the
digital camera or external device. (If you
are using a Cyber-shot, set “USB
Connect” to [Normal] or [Mass Storage].)
3 Press 1 (on/standby) on the photo
frame to turn on the power.
4 Connect the digital camera or
external device to the USB A
connector.
Use the USB cable supplied with the
digital camera or external device to
connect to the photo frame.
Bluetooth
compatible mobile
phone