Filter
Top Products
Help Guide | Sending images to an Android smartphone (NFC One-touch Sharing)
http://www.sony-asia.com/microsite/cybershot_userguides/DSC-RX10/eng/contents/TP0000226697.html[24/11/2013 16:10:08]
touch on the designated touch-point.
Note
You can select an image size to be sent to the smartphone from [Original], [2M], or [VGA].
To change the image size, refer to the following steps.
For Android smartphone
Start “PlayMemories Mobile,” and change the image size by [Settings] → [Copy Image Size].
For iPhone/iPad
Select “PlayMemories Mobile” in the setting menu, and change the image size by [Copy Image Size].
RAW images are converted to JPEG format when they are sent.
If the Image Index is displayed on the product, you cannot transfer images using the NFC
function.
If you cannot make a connection, perform the following:
Launch “PlayMemories Mobile” on your smartphone, and then move the smartphone slowly toward the
(N mark) of this product.
If the smartphone is in a case, remove it.
If the product is in a case, remove it.
Confirm that the NFC function is activated on the smartphone.
When [Airplane Mode] is set to [On], you cannot connect the product and the smartphone.
Set [Airplane Mode] to [Off].
You cannot send AVCHD format movies.
Related Topic
Connecting an Android smartphone to this product
Connecting the product to an iPhone or iPad
Airplane Mode
Send to Smartphone
“PlayMemories Mobile”
Notes on use
4-477-079-12(1)
Copyright 2013 Sony Corporation