Filter
Top Products
Cyber-shot User Guide
PrintSearch
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions / About this camera
Contents list
Top page > Troubleshooting > Troubleshooting > Shooting still images/movies
Shooting still images/movies
Cannot record images.
If images are recorded on the internal memory even when a memory card is inserted into the camera,
make sure that the memory card is fully inserted into the camera.
Check the free capacity of the internal memory or memory card. If it is full, do one of the following:
Delete unnecessary images. [Details] [Details]
Change the memory card.
You cannot record images while charging the flash.
When recording movies, it is recommended that you use the following memory cards:
“Memory Stick PRO Duo” (Mark2) media, “Memory Stick PRO-HG Duo” media
SD memory card, SDHC memory card or SDXC memory card (Class 4 or faster)
Set the mode switch to
(Still Image) when shooting still images.
Set the mode switch to
(Movie) when shooting movies.
Set [Demo Mode] to [Off]. [Details]
Smile Shutter function does not work.
No image is shot if a smiling face is not detected. [Details]
Set [Demo Mode] to [Off]. [Details]
Anti-blur function does not work.
The anti-blur function may not work properly when shooting night scenes.
Shoot after pressing the shutter button halfway down.
Recording takes a long time.
When the shutter speed becomes slower than a certain speed, for example, when you shoot images
in dark locations, the camera automatically reduces the image noise. This function is called NR
(noise reduction) slow shutter and the shooting time takes longer.
The image is out of focus.
The subject is too close. When shooting, make sure to position the lens farther away from the subject
than the shortest shooting distance (approximately 5 cm (2 inches) (W)/150 cm (4 feet 11 1/8 inches)
(T) from the lens).
(Night Scene), (Landscape) or (Fireworks) mode is selected in the Scene Selection when
shooting still images.
Zoom does not work.
You cannot use the optical zoom in Sweep Panorama mode.
Search