Filter
Top Products
Cyber-shot User Guide
PrintSearch
Before Use
Shooting
Viewing
Using MENU items (Shooting)
Using MENU items (Viewing)
Changing settings
Viewing images on a TV
Using with your computer
Printing
Troubleshooting
Precautions / About this camera
Contents list
Top page > Using MENU items (Shooting) > MENU items (Shooting) > Anti Blink
Anti Blink
When Scene Selection is set to [Soft Snap] and the subject blinks while you are shooting an image, the
camera automatically shoots two images consecutively. The camera will select, display and record the
image which the eyes are not blinked automatically.
1. MENU
(Anti Blink) desired mode
(Auto)
When Face Detection is active, the Anti Blink function operates so that images with the
subject’s eyes open are recorded.
(Off)
Does not use the Anti Blink function.
Notes
Anti Blink does not function in the following situations:
When using the flash
During burst shooting
When the Face Detection function does not work
When the Smile Shutter function is activated
Sometimes the Anti Blink function does not work depending on the situation.
When the Anti Blink function is set to [Auto] but only images with the subject’s eyes closed are
recorded, the message “Blinked eye detected” is displayed on the screen. Shoot again as
necessary.
Related Topic
Scene Selection
Back to top
Copyright 2012 Sony Corporation
Search