Filter
Top Products
112
Saving and Loading User Files
Chapter 6 Saving and Loading the User Setting Data
(P00 to P19), that are the pages to save and call up the data
to and from “Memory Stick”.
1
Display the USER FILE LOAD page or the USER
FILE SAVE page of the USER FILE menu.
For details on menu operations, see “Basic menu
operations” on page 93.
2
Press the MENU knob. Then turn the MENU knob to
move b to DISPLAY MODE, and press the MENU
knob again.
b changes to z and z changes to ?.
3
Turn the MENU knob until the desired type of the
display contents (see the following table) appears, then
press the MENU knob.
z changes to b and ? changes to z. The selection is
set.
Loading saved data from a “Memory
Stick”
The data loaded from the “Memory Stick” overwrites the
data saved in the camcorder.
1
Display the USER FILE page of the FILE menu.
For details on menu operations, see “Basic menu
operations” on page 93.
2
Press the MENU knob. Then turn the MENU knob to
move b to USER FILE LOAD, and press the MENU
knob again.
The P00 USER LOAD page appears.
3
Turn the MENU knob until the page which contains
the desired file appears.
4
Press the MENU knob. Then turn the MENU knob to
move b to the desired file number to be loaded, and
press the MENU knob again.
The message “LOAD OK? YES b NO” appears.
5
To carry out the load, turn the MENU knob to move b
to YES and press the MENU knob.
To cancel, press the MENU knob leaving b pointing to
NO.
The access indicator lights.
When the load is completed, the message
“COMPLETE” appears and the access indicator goes
off.
The USER FILE page appears again.
If data cannot be loaded
If one of the following error messages appears during or
after the load operation, then the data was not loaded.
Display type Description
ALL File ID (10 characters) and date
(month/day/year)
F.ID File ID (16 characters)
DATE Saved date (year/month/day/
hours/minutes/seconds)
MODEL Information on the model
Note
?P00 USER LOAD
DISPLAY MODE : ALL
001.USER1 JAN/01/04
002.USER2 JAN/15/04
003.NO FILE
004.USER4 FEB/05/04
005.USER5 FEB/20/04
ESC
Error message Cause Action
NO MEMORY
STICK (flashing)
No “Memory Stick”
is inserted.
Insert or reinsert
the “Memory
Stick”.
MEMORY STICK
ERROR (flashing)
Circuit or “Memory
Stick” fault.
Recheck, and
consult your Sony
representative.
FILE ERROR
(flashing)
The “Memory
Stick” contains
data that cannot be
loaded into this
camcorder.
You cannot load
data saved from
another
camcorder.
P00 USER LOAD
LOAD OK? YES NO
DISPLAY MODE : ALL
001.USER1 JAN/01/04
002.USER2 JAN/15/04
003.NO FILE
004.USER4 FEB/05/04
005.USER5 FEB/20/04
ESC