Sony DSR-400L/400PL Camcorder User Manual


 
116
Saving and Loading Scene Files
Chapter 6 Saving and Loading the User Setting Data
according to the loaded scene file. If no file is present
with a particular file number, this is shown as “NO
FILE”.
To load scene files from a “Memory Stick”
into the camcorder memory
You can load up to five scene files stored in the “Memory
Stick” into the camcorder memory in a single operation.
1
Display the SCENE FILE page of the FILE menu.
For details on menu operations, see “Basic menu
operations” on page 93.
2
Press the MENU knob. Then turn the MENU knob to
move b to SCENE RECALL, and press the MENU
knob again.
The SCENE RECALL page appears.
3
Turn the MENU knob until the SCENE RECALL
page which contains the desired scene files appears.
4
Press the MENU knob. Then turn the MENU knob to
move b to 5FILE LOAD B MEM 1-5, and press the
MENU knob.
The message “RECALL OK? YES b NO” appears.
5
To carry out the recall, turn the MENU knob to move
b YES and press the MENU knob.
To cancel, press the MENU knob leaving b pointing to
NO.
When loading is complete, the message
“COMPLETE” appears and the access indicator goes
off.
The scene files loaded from the “Memory Stick”
overwrite data saved in the camcorder memory.
To load the scene file saved in the camcorder memory
when the “Memory Stick” is inserted, return to the P00
SCENE RECALL page and load the desired scene file in
the camcorder memory.
When there is no file to be loaded (shown as “NO
FILE”), an existing file of the same number is
unaffected. In the example shown in step 4, MEM(3) is
not overwritten.
Resetting the settings of the
camcorder to the standard settings
You can reset the settings of the camcorder to the settings
saved in the reference file (standard settings).
For the items to be saved in the reference file, see page 74.
1
Display the SCENE FILE page of the FILE menu.
For details on menu operations, see “Basic menu
operations” on page 93.
2
Press the MENU knob. Then turn the MENU knob to
move b to STANDARD, and press the MENU knob
again.
s displayed on the left of STANDARD changes to x.
When x changes to s once again, the settings of the
camcorder are reset to the settings saved in the
reference file.
If you press the MENU knob again while x is
displayed, the operation is cancelled and the
camcorder returns to the settings before STANDARD
was selected.
Notes
P01 SCENE RECALL
RECALL OK? YES NO
DISPLAY MODE : ALL
001.SCENE1
002.SCENE2
003.NO FILE
004.SCENE4
005.SCENE5
***.5FILE LOAD MEM1-5
ESC
F04 SCENE FILE
s
1 :SCENE 25
s
2 :SCENE 26
s
3 :SCENE 27
s
4 :SCENE 28
s
5 :NO FILE
x
STANDARD
SCENE RECALL : EXEC
SCENE STORE : EXEC
F.ID :SCENE21
TOP