Filter
Top Products
20
Audio Functions
Chapter 2 Locations and Functions of Parts and Controls
f MONITOR volume control
This control adjusts the speaker or earphone volume for
sounds other than the alarm sound. At the minimum
position, no sound can be heard.
g ALARM volume control
This control adjusts the speaker or earphone alarm volume.
At the minimum position, no sound can be heard.
ALARM volume control
h Built-in speaker
The speaker can be used to monitor E-E sound during
recording, and playback sound during playback. The
speaker also sounds alarms to reinforce visual warnings.
If you connect an earphone to the EARPHONE jack, the
speaker is automatically muted.
See “8-3 Operation Warnings” on page 129 for
information about alarms.
Audio functions (2)
i LEVEL (CH-1/CH-2) (audio channel-1 and
channel-2 recording level) controls
These controls adjust the audio levels of channels 1 and 2
when the AUDIO SELECT switches are set to MANUAL.
j AUDIO SELECT CH-1/CH-2 (audio channel-1 and
channel-2 adjustment method selection) switches
These switches select the audio level adjustment method
for each of audio channels 1 and 2.
AUTO: Select this setting for automatic adjustment.
MANUAL: Select this setting for manual adjustment.
CH-1/2/CH-3/4
switch
position
MONITOR
switch
position
Audio output
CH-1/2 CH-1 Audio channel 1
MIX Mix sound of channels 1 and 2
CH-2 Audio channel 2
CH-3/4 CH-3 Audio channel 3
MIX Mix sound of channels 3 and 4
CH-4 Audio channel 4
Minimum Maximum
CUE IN
CH-1
MIX
CH-2
iLEVEL (CH-1/CH-2) controls
kAUDIO IN CH-1/CH-2/CH-3/CH-4 switches
jAUDIO SELECT CH-1/CH-2 switches
mAUDIO OUT connector
oDC OUT 12V connector
nAUDIO IN CH1/CH2 connectors
and LINE/MIC/+48V ON switches
l CUE IN switch