Filter
Top Products
87
Adjustments and Settings from Menus
Chapter 5 Menu Displays and Detailed Settings
However, the image is switched while you are holding
down the ASSIGN 1 switch to which the return video
function is assigned, even if no signal is input to the
GENLOCK IN connector.
5-3 Adjustments and
Settings from Menus
The camcorder provides menus for adjustments and
settings.
5-3-1 Setting Gain Values for the
GAIN Selector Positions
Before using the camcorder, use the GAIN SW page of the
USER menu to set the gains corresponding to the L, M,
and H positions of the GAIN selector, which switches the
gain of the video amplifier.
To set the gain values, proceed as follows:
1
Set the MENU ON/OFF switch to ON.
The last accessed menu page appears on the
viewfinder screen.
2
Turn the MENU knob until the GAIN SW page
appears, then press the MENU knob to select the page.
The current setting of each item appears on the right of
the item.
GAIN SW page
Item Description
GAIN LOW Sets the gain value corresponding to
the L position of the GAIN selector.
GAIN MID Sets the gain value corresponding to
the M position of the GAIN selector.
GAIN HIGH Sets the gain value corresponding to
the H position of the GAIN selector.
GAIN TURBO Sets the gain value corresponding to
TURBO GAIN button selection.
U08 GAIN SW
GAIN LOW : 0db
GAIN MID : 9db
GAIN HIGH : 18db
GAIN TURBO : 42db
TURBO SW IND : OFF
TOP