Sony DCR-DVD109 Camcorder User Manual


 
63
Customizing your camcorder
You can select the maximum zoom level in
case you want to zoom greater than optical
zoom magnification (p. 34). Note that the
image quality decreases when you use the
digital zoom.
For DCR-DVD106E/DVD108E/DVD109E/
DVD608E
BOFF
Up to 40 × zoom is performed optically.
80×
Up to 40 × zoom is performed optically, and
after that up to 80 × zoom is performed
digitally.
2000×
Up to 40 × zoom is performed optically, and
after that, up to 2,000 × zoom is performed
digitally.
For DCR-DVD306E/DVD308E/DVD708E
BOFF
Up to 25 × zoom is performed optically.
50×
Up to 25 × zoom is performed optically, and
after that up to 50 × zoom is performed
digitally.
2000×
Up to 25 × zoom is performed optically, and
after that, up to 2,000 × zoom is performed
digitally.
You can compensate for camera shake (the
default setting is [ON]). Set
[STEADYSHOT] to [OFF] ( ) when
using a tripod (optional), then the image
becomes natural.
When this is set to [ON] (the default
setting), the shutter speed is automatically
reduced to 1/25 second when recording in
dark conditions.
BAUTO
Displays the remaining disc indicator for
about 8 seconds in situations such as those
described below.
–When your camcorder recognizes the
remaining disc capacity with the POWER
switch set to (Movie).
–When you press DISP/BATT INFO to
switch the indicator from off to on with
the POWER switch set to (Movie).
–When you select the movie recording
mode on the HOME MENU.
ON
Always displays the remaining disc
indicator.
b Notes
When the remaining recordable time for movies
is less than 5 minutes, the indicator stays on the
screen.
Select [ON] (the default setting) to display
the recording date and time when you play
back a disc on a device with a subtitle
display function. Also refer to the
instruction manual of the playback device.
DIGITAL ZOOM
The right side of the bar shows the digital
zooming factor. The zooming zone appears
when you select the zooming level.
STEADYSHOT
AUTO SLW SHUTTR
(Auto slow shutter)
REMAINING
SUB-T DATE