Filter
Top Products
Getting Started
13
Step 2: Charging the battery pack
You can charge the “InfoLITHIUM”
battery pack (H series) (p. 94) after
attaching it to your camcorder.
Notes
Your camcorder operates only with an
“InfoLITHIUM” battery pack (H series).
1 Connect the AC Adaptor to the DC
IN jack on the Handycam Station.
Be sure that the mark on the DC plug
is facing up.
2 Connect the power cord (mains
lead) to the AC Adaptor and the wall
outlet (wall socket).
3 Turn the POWER switch in the
direction of the arrow to OFF (CHG)
(the default setting).
4 Attach the battery pack by sliding it
in the direction of the arrow until it
clicks.
5 Set the camcorder onto the
Handycam Station securely.
e
/CHG (charge) lamp lights up and
charging starts.
e /CHG (charge) lamp turns o
when the battery pack is fully charged.
When setting the camcorder onto the
Handycam Station, close the DC IN jack
cover.
Notes
Disconnect the AC Adaptor from the DC IN
jack holding both the Handycam Station and
the DC plug.
Battery pack
DC IN jack
DC plug
AC Adaptor
Power cord (Mains lead)
To the wall outlet
(wall socket)
/CHG (charge)
lamp
POWER switch