Filter
Top Products
37
Using the Menu
When you set [SELF-TIMER] to [ON]
( ), the self-timer starts recording in about
10 seconds after pressing PHOTO to record
still images.
To cancel the count down, touch [RESET].
To cancel [SELF-TIMER], touch [OFF].
z Tips
• You can also set the self-timer with the PHOTO
button of the Remote Commander (p. 88).
You can select the maximum zoom level in
case you want to zoom to a level greater
than 25 × (the default setting) while
recording on a tape. Note that the image
quality decreases when you are using the
digital zoom.
BOFF
Up to 25 × zoom is performed optically.
50 ×
Up to 25 × zoom is performed optically,
and after that, up to 50 × zoom is
performed digitally.
2000 ×
Up to 25 × zoom is performed optically,
and after that, up to 2,000 × zoom is
performed digitally.
You can compensate for camera shake (the
default setting is [ON]).
Set [STEADYSHOT] to [OFF] ( ) when
using a tripod (optional) or the conversion
lens (optional), then the image becomes
natural.
SELF-TIMER
DIGITAL ZOOM
The right side of the bar shows the digital
zooming factor. The zooming zone
appears when you select the zooming
level.
STEADYSHOT