Filter
Top Products
9
Getting Started
b Notes
• When inserting the camcorder into the
Handycam Station, close the DC IN jack cover.
• Disconnect the AC Adaptor from the DC IN
jack holding both the Handycam Station and the
DC plug.
To charge the battery pack using only
the AC Adaptor
Turn off the power, then connect the AC
Adaptor to the DC IN jack on your
camcorder.
z Tips
• You can operate your camcorder connected to a
power source such as a wall socket as shown in
the illustration. The battery pack will not lose its
charge in this case.
To remove your camcorder from the
Handycam Station
Turn off the power, then remove the
camcorder from the Handycam Station
holding both your camcorder and the
Handycam Station.
To remove the battery pack
1 Turn off the power, then press PUSH.
2 Remove the battery pack in the direction
of the arrow.
When storing the battery pack
Fully discharge the battery before storing it
for an extended period (p. 77).
With the v mark
facing down
DC IN jack
Open the
jack cover
POWER switch
DC plug
2
1
POWER switch
PUSH
Continued ,