Filter
Top Products
40
Locations and Functions of Parts
Locations and Functions of Parts
Accessory Attachments
a VF (viewfinder) connector (20-pin)
Connect the cable of the viewfinder (not supplied).
b Shoulder strap fitting post
Attach one end of a shoulder strap (not supplied) to this
fitting post, and the other end to the fitting post on the other
side of the camera.
c Viewfinder front-rear positioning lever and LOCK
knob
Loosen the lever and knob to adjust the viewfinder position
towards the front or rear.
d Viewfinder left-right positioning ring
Loosen this ring to adjust the viewfinder position towards
the left or right.
For details on adjusting the viewfinder position, see
“Attaching a Viewfinder” on page 48.
e Lens cable clamp
Used to secure the cable of the lens (not supplied).
f Lens fixing lever
Used to secure the lens in the lens mount.
g Lens mount cap
Cover the lens mount with this cap when a lens is not
attached. The cover may be removed by moving the lens
fixing lever upwards.
h Lens mount
Used to attach a lens (not supplied).
i LENS connector (12-pin)
Connect the lens cable. The camera can control the lens
functions through this cable.
kShoulder pad
bShoulder strap fitting post
aVF connector
cViewfinder front-rear positioning
lever and lock knob
dViewfinder left-right positioning
ring
eLens cable clamp
fLens fixing lever
gLens mount cap
hLens mount
iLENS connector
jTripod mount