Filter
Top Products
46
Locations and Functions of Parts
Connector panel
a EARPHONE jack (stereo minijack)
Connect an earphone or headset for output of the intercom.
b RET CONT (return control) connector (6-pin)
Used for connection to a CAC-6 Return Video Selector.
c CRANE connector (12-pin)
For external interface, such as viewfinder and external
data.
d TRACKER connector (10-pin)
For external interface, such as intercom and tally.
e DC OUT (DC power supply output) connector (4-
pin)
Used to supply power to devices such as a wireless receiver
(optional).
f DC IN (DC power supply input) connector (XLR 4-
pin)
Used for connection to the AC-DN10 AC Adaptor to
supply power to the camera.
g INCOM1 and 2 (intercom 1 and 2) connectors (XLR
5-pin)
Used for input and output of intercom audio signals.
h REMOTE connector (8-pin)
Used for connection to an RM-B150/B750 Remote
Control Unit, RCP-700-series Remote Control Panel, or
MSU-900/950 Master Setup Unit.
When the camera is connected to a CCU, do not connect
any device to this connector.
i GENLOCK IN
1)
/RET IN
1)
/PROMPTER OUT
(external gen-lock signal input/return video signal
input/prompter signal output) connector (BNC
type) and switch
Set the switch according to the signal at the connector.
1)
GENLOCK IN: Used for input of an external gen-lock
signal when the camera is used without connecting a
camera control unit
RET IN: Used for input of the return video signal (HD-Y)
when the camera is used without connecting a camera
control unit
PROMPTER OUT: Used for output of a prompter signal
(valid only when a camera control unit is connected)
1) For future use
j TEST OUT connector (BNC type)
Used to output the analog signal.
This also supplies the VBS signal, an HD signal nearly
equal to the signal output from the VF connector, an HD-
SYNC signal, or an SD-SYNC signal depending on which
of these you have selected on the menu.
k SDI 2 (serial digital interface 2) connector (BNC
type)
Used for HD SDI or SD SDI signal output.
OFF
+48V
MIC
FRONT MIC
DC OUT
AUDIO IN
CH1 CH2
TEST
OUT
SDI 2
DC IN 10.5-17V
PROMPTER
RET IN
GENLOCK IN
LINE
OFF
+48V
MIC
AES/EBU
LINE
EARPHONE
REMOTE
RET CTRL
CRANETRACKER
gINCOM1 and 2 connectors
aEARPHONE jack
dTRACKER connector
cCRANE connector
iGENLOCK IN/RET IN/
PROMPTER OUT
connector and switch
lAUDIO IN CH1 and CH2 connectors and switches
bRET CONT connector
hREMOTE connector
jTEST OUT connector
eDC OUT connector
fDC IN connector
kSDI 2 connector
Note