Sony HVL-F43AM Camera Flash User Manual


 
HVL-F43AM
4-278-307-11(1) GB
C:\édéñÉtÉHÉãÉ_\ÅiäîÅjÉGÉXÉPÉCÉèÅ[Éh\SO-
NY\VX9197\SourceÉfÅ[É^\4278307111\4278307111\4278307111HVLF58AMUC\01GB-
HVLF58AMUC\050C02.fm
Master: Left
22
3 Press the shutter button halfway down and make sure
that the subject is within the flash range.
See page 23 for details on the flash range.
4 When the flash unit is charged, press the shutter
button to take a photo.
The flash unit is fully charged when the TEST button on the control panel is
lit in amber.
When the correct exposure has been obtained for the photo just taken, the
TEST button on the control panel blinks in green.
The photo will be under-exposed because of a lack of luminescence if taken
before charging is complete.
Press the shutter button after making sure that charging is complete when using
the flash unit with the self-timer.
The flash mode selected (auto flash ( AUTO), fill-flash ( ), or un-fill-flash
( )) depends on your camera. For details, refer to the operating instructions of
your camera.