Filter
Top Products
HVL-F43AM
4-278-307-11(1) GB
C:\édéñÉtÉHÉãÉ_\ÅiäîÅjÉGÉXÉPÉCÉèÅ[Éh\SO-
NY\VX9197\SourceÉfÅ[É^\4278307111\4278307111\4278307111HVLF58AMUC\01GB-
HVLF58AMUC\060C03.fm
Master: Right
Advanced Operations
53
Setting wireless flash by flash only
Once you have performed the wireless flash setup in step [A], if you continue to use
the same camera and flash combination without changing the wireless channel then
you can also set the flash and camera separately to wireless.
Camera setting:
Set the camera to the wireless flash mode.
For details, refer to the operating instructions supplied with your camera.
Flash setting:
1 Press the TTL/M button to display or .
• When selecting , the flash unit fires with the power level to be
set.
2 Press the MODE button repeatedly to display [WL], and
then press the Fn button.
3 Press the g or G button to make [RMT] or [RMT2] blink,
and then press the Fn button.
• Make sure that the wireless channel of the off-camera flash is set to the
same channel as the controller.
For details on setting the wireless channel, see “Custom settings” (page
63).