Filter
Top Products
HVL-F43AM
4-278-307-11(1) GB
C:\édéñÉtÉHÉãÉ_\ÅiäîÅjÉGÉXÉPÉCÉèÅ[Éh\SO-
NY\VX9197\SourceÉfÅ[É^\4278307111\4278307111\4278307111HVLF58AMUC\01GB-
HVLF58AMUC\060C03.fm
Master: Left
58
1 Set the camera, flash (controller), and flash (off-camera
flash) to wireless flash.
Camera Setting:
Set the camera to wireless flash.
For details, refer to the operating instructions supplied with your camera.
Controller Setting:
1 Press the MODE button repeatedly to display [WL],
and then press the Fn button.
2 Press the g or G button to make [CTRL] and
[RATIO] blink, and then press the Fn button.
3 Press the f or F button to select the lighting ratio.
• The lighting ratio may be set to the following.
1, 2, 4, 8, 16, --
*
* The flash unit cannot flash when the lighting ratio is set to [--].
4 Press the g or G button to select the lighting ratio
of the controller and off-camera flash units (RMT,
RMT2), and then press the Fn button.
• Set the power level ratio to [--] on the flash unit when there is an off-
camera flash (RMT/RMT2) you don't want to fire when you use the
flash unit with the controller after setting the flash unit to [CTRL1].
5 Press the TTL/M button to display .
• When is selected, manual setting flash is used with the
lighting ratio control.