Filter
Top Products
36
KNEE
To set knee point and slope for video signal compression to reduce over-highlighting by
limiting signals in high contrast area of the subject to the dynamic range of your camcorder.
COLOR MODE
To set type and level of colors.
COLOR LEVEL
To set the color level.
COLOR PHASE
To set the color phase.
Item Description and settings
[MODE] Selects a mode either automatic or manual.
[AUTO] : to set the knee point and slope automatically.
[MANUAL] : to set the knee point and slope manually.
[AUTO SET] Sets the maximum point and sensitivity in the automatic mode.
[MAX POINT] : Sets the maximum point.
90% to 100%
[SENSITIVITY] : Sets the sensitivity.
HIGH/MIDDLE/LOW
[MANUAL SET] Sets the knee point and slope manually.
[POINT] : Sets the knee point.
75% to 105%
[SLOPE] : Sets the knee slope.
-5(gentle) to +5(steep)
Item Description and settings
[TYPE] Selects a type of colors.
[STANDARD] : Standard colors
[CINEMATONE1]: Film camera image-like colors good with
[GAMMA] set to [CINEMATONE1]
[CINEMATONE2]: Film camera image-like colors good with
[GAMMA] set to [CINEMATONE2]
[ITU709 MTX] : Colors corresponding to ITU-709
[LEVEL] Sets a color level when you set [TYPE] to the settings other than
[STANDARD].
1 (close to color settings of [STANDARD]) to 8 (color settings of the
selected type)
Item Description and settings
-7 (light) to +7 (dark), -8: black and white
Item Description and settings
-7 (greenish) to +7 (reddish)
Changing the settings of your camcorder recordings (Continued)