Filter
Top Products
5-GB
GB
Preparations
Preparing your camcorder
Before installing your camcorder in the marine pack, prepare the camcorder according
to this chapter. The DCR-TRV50E is the model used for illustration purposes.
Otherwise, the model name is indicated in the illustrations. Any differences in
procedure are clearly indicated in the text, for example, “for DCR-TRV50E.”
The procedure may be different depending on your camcorder type.
For details, please refer to the operating instructions supplied with your camcorder.
1 Remove the lens cap, shoulder strap,
conversion lens, filter or lenshood from
the camcorder.
2 Attach a charged battery pack.
3 Insert a cassette tape or “Memory Stick”.
Select the media you want to record onto.
4 Attach the reflex prevention ring to the lens.
for DCR-TRV9E/TRV20E/TRV30E/TRV40E/TRV50E : ø 37 mm (large)
for DCR-TRV6E/TRV8E/TRV10E/TRV11E/TRV15E/
TRV16E/TRV17E/TRV18E/TRV24E/TRV25E/TRV27E/TRV116E/TRV118E
: ø 30 mm (small)
for DCR-TRV890E/TRV900E : not necessary
Be sure not too tighten prevention ring.
continued