Filter
Top Products
6-GB
Preparation (continued)
Camera mounting
shoe B
Screw plate
For DCR-TRV8E/TRV10E
Use camera mounting shoe B,
spacer C, and the screw plate.
1 Attach the spacer C to shoe B.
2 Attach the screw plate to
position 3 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
3 Fasten the screw of the screw
plate to the tripod screw hole of
the camcorder and tighten
firmly.
4 Connect the A/V cable of the
shoe to the camcorder’s
AUDIO/VIDEO jack.
Spacer C
3
Installation
position
of the screw plate
on the camera
mounting shoe B
5 Attach the camera mounting shoe.
For DCR-TRV9E/TRV890E/TRV900E
Use camera mounting shoe B and
the screw plate.
Check the installing position of the
screw plate for your camcorder
against the table below.
DCR- Camera mounting Shoe B
TRV9E 1
TRV890E 2
TRV900E 2
1 Attach the screw plate to
position 1 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
2 Fasten the screw of the screw
plate to the tripod screw hole of
the camcorder and tighten
firmly.
3 Connect the A/V cable of the
shoe to the camcorder’s
AUDIO/VIDEO jack.
Screw plate
Camera
mounting
shoe B
1
Installation position
of the screw plate
on the camera
mounting shoe B