Filter
Top Products
9-GB
GB
For DCR-TRV16E/TRV18E/TRV24E/TRV25E/TRV27E/TRV116E/
TRV118E
Use camera mounting shoe B and E,
spacer C, and the screw plate.
1 Attach the spacer C to shoe E.
Attach the screw plate to
position 2 on shoe E so that the
catch on the reverse side of the
shoe clicks into place.
2 Fasten the screw of the screw
plate on shoe E to the tripod
screw hole of the camcorder and
tighten firmly.
3 Attach the screw plate to
position 2 on shoe B.
4 Fasten the screw of the screw
plate on the shoe B to the screw
hole on the shoe E of the
camcorder tightly.
5 Attach the screw plate to
position 2 on shoe B so that the
catch on the reverse side of the
shoe clicks into place.
6 Connect the A/V cable of the
shoe to the camcorder’s
AUDIO/VIDEO jack.
Installation
position
of the screw plate
on the camera
mounting shoe B
Now you are ready to install the camcorder to the marine pack.
Be sure to check that the camera mounting shoe is attached to the camcorder
tightly before you install the camcorder to the marine pack.
continued
3
Camera mounting
shoe B
Screw plate
Spacer C
Camera mounting
shoe E
Screw plate