Filter
Top Products
Additional information
63-GB
Symptom Cause and/or Solution
•The ambient temperature is too low.
•Charging of the battery pack is not enough.
tCharge the battery pack fully.
•The battery pack has served its time.
tReplace the battery pack with a new one.
•Panfocus mode in PROGRAM AE is working.
tCancel it. (p. 31)
•PLAY/STILL/MOVIE is not set to PLAY.
tSet it to PLAY. (p. 20, 21)
•The battery is dead.
tUse a charged battery pack.
•The image file is on a floppy disk.
tCopy to the hard disk of a personal computer.
Then play back the image from the hard disk.
(p. 25)
•Contact your personal computer maker or
software maker.
•The image is protected.
tCancel the protection of the image. (p. 41)
•If you leave the camera inactive in STILL/
MOVIE mode for about 3 minutes while the
power is on, it turns off automatically to prevent
wearing down the battery.
tTurn the power on.
•VIDEO OUT setting is not correct.
tChange the setting. (p. 56, 58, 59)
•The A/V connecting cable is connected.
tDisconnect the A/V connecting cable.
•The maximum length to play back is about 20
minutes.
tSet REPEAT to ON again if you continue
SLIDE SHOW. (p. 39)
•Image size is bigger than 1600 × 1200.
tYou cannot play back the image on your
camera.
•PLAY/STILL/MOVIE is set to MOVIE.
tSet to STILL.
The battery life
deteriorates too fast.
Zoom does not work.
You cannot play back the
images on the LCD
screen.
The picture and sound
break off when you play
back the images using a
personal computer.
You cannot play back the
image using a personal
computer.
You cannot delete an
image.
The power turns off
automatically.
The picture does not
appear on the TV screen.
The picture does not
appear on the LCD
screen.
SLIDE SHOW stops auto-
matically.
FILE ERROR appears on
the LCD screen.
Digital zoom does not
work.