Filter
Top Products
Error/Warning Indications
157
Appendixes
Unknown Media(A)
1)
Please Change.
A partitioned memory card or one that contains recorded clips
exceeding the number permitted with this camcorder is loaded.
This card cannot be used with this camcorder. Remove it and
load a compatible card.
Media Error
Media(A)
1)
Needs to be
Restored
An error occurred with the memory card. The card requires
restoration.
Remove the card, load it again, and restore it.
Reached Clip Number
Limit
Cannot Record on
Media(A)
1)
The maximum number of clips for a single memory card is
reached. No more clip can be recorded on the card.
Replace it with another card.
Media Error
Cannot Record to
Media(A)
1)
Recording cannot be done, as the memory card is defective.
As playback may be possible, it is recommended to replace it
with another card after copying the clips, as required.
Media Error
Cannot Use Media(A)
1)
Neither recording nor playback can be done, as the memory
card is defective.
It cannot be operated with this camcorder. Replace it with
another card.
Cannot Use Media(A)
1)
Unsupported File System
A card of a different file system was inserted.
It cannot be used with this camcorder. Replace it with another
card.
Video Format Mismatch The external signal input via the i.LINK connection cannot be
recorded, as the Video Format setting is different from the
signal format of the external input signal.
Change “Video Format” of the OTHERS menu to match it to
that of the external signal.
Copy Protected Input
Cannot Record
The external signal input via the i.LINK connection cannot be
recorded, as the stream is copy-protected.
Check the input signal.
DVCAM Input
Cannot Record
The external signal input via the i.LINK connection cannot be
recorded, as it is a DV stream.
Media Error
Playback Halted
An error occurred in reading data from the memory card, and
playback cannot be continued.
If this frequently occu
rs, change the memory card after
copying the clips, as required.
Media(A)
1)
Error
Recording cannot be done, as an error occurred with the
memory card.
If this frequently occurs, change the memory card.
HDD A
2)
Battery Near
End
Intermittent Flashing The battery power of the connected HDD will be exhausted
soon.
Change the battery at the earliest opportunity.
HDD A
2)
Battery End
ContinuousRapidly
flashing
The battery of the connected HDD is exhausted. Recording
cannot be performed.
Stop operation to change the battery.
Not Enough Capacity
Change Media (A)
1)
There is not enough capacity for copying.
Replace the card with another one.
Reached Duplication
Limit
Change Media (A)
1)
The card have already ten clips having the same name as that
you tried to duplicate.
Replace the card with another one.
Warning indication
on LCD/EVF
Buzzer Tally
lamps
Cause and measures