Sony SCH-735 Digital Camera User Manual


  Open as PDF
of 25
 
COLOR CCD CAMERA User Guide
24
COLOR CCD CAMERA User Guide
25
How to Use the Camera
SHUTTER:Youcanselecteitherautoormanualshutter.
- A.FLK : Select this when you experience picture flicker, which can happen when
there is a clash with the frequency of the installed lighting.
- ESC : Select this to control the shutter speed automatically. If ESC is selected, the
shutter speed is automatically controlled depending on the ambient
illumination of the subject.
- MANUAL : You can control shutter speed manually.
1.WhentheSETUPmenuscreenisdisplayed,select‘EXPOSURE’byusingtheUp
andDownbuttonssothatthearrowindicates‘EXPOSURE’.
2. Select a desired mode using the Up and Down buttons.
AGC (AUTO GAIN CONTROL):
The higher the gain level, the brighter the screen - but the higher the noise.
- OFF : Deactivates the AGC function.
- LOW : Allows automatic gain control from 0 to 30dB.
- HIGH : Allows automatic gain control from 0 to 42dB.
SENS-UP:
When it is night or dark, the camera automatically
detects the light level and maintains a clear picture if
this mode is activated.
- OFF : Deactivates the SENS-UP function.
- AUTO : Activates the SENS-UP function.
•ToproducebetterresultswithA.FLK,donotuseitinconjunctionwiththeWDR
modeoftheBACKLIGHTmenu.
•WhentheSHUTTERissettoESCafterselectingtheInternalSynchronizationType,
the picture may become unstable if the camera faces a bright fluorescent light.
Therefore, take care when choosing the installation position.
•WhenyouuseDClens,settheshuttermodetofixed(---)ifColorRollingisoccurred.
•WhentheSHUTTERissettoMANUALorA.FLKmode,SENS-UPwillbedisabled.
Notes
RETURN:
SelectthistosavethechangesintheEXPOSUREmenuandreturntotheSETUPmenu.
•IfyoupresstheSETbuttonin‘AUTO’mode,Youcanadjustbrightnessbyincreasing
ordecreasingtheshutterspeed.(X2~X256)
•Notethatthehigherthezoomlevel,thebrighterthescreen,butthemorelikelyitis
that an after-image will appear.
•AlthoughNoise,Spots,andWhitishsymptomsmayoccurinSENS-UPoperation
when the zoom level is increased, this is normal.
Notes
Use the White Balance function to adjust the screen color.
1.WhentheSETUPmenuscreenisdisplayed,select‘WhiteBal.‘byusingtheUp
andDownbuttonssothatthearrowindicates‘WhiteBal.‘.
2. Select a desired mode using the Up and Down buttons.
White Balance (White Bal.)
✽ Select one of the following 5 modes, as appropriate for your purpose.
ATW:Selectthiswhenthecolortemperatureisbetween1,800ºand10,500ºK
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.BACKLIGHT OFF
 previous next