Sony SCH-735 Digital Camera User Manual


  Open as PDF
of 25
 
COLOR CCD CAMERA User Guide
36
COLOR CCD CAMERA User Guide
37
- FILL → SET : Fills in a selected MD area. Fills in a selected MD area. The color of
filling is sequentially selected as brown, orange, blue, cyan,
yellowish green, yellow and red.
- RETURN : Select this to save the MOTION DET menu settings and return to the
SPECIAL menu.
•
WhenusingACpowerat60Hzfrequency,youcanusetheL/Ltypesynchronization.
•WhenthepowerisDC12V,theSYNC.menuisfixedtothe‘INT’mode.
Notes
•
MDareasshowonlyMOTIONDETmenu.Therefore,MDareasdon’tdisplayonthe
monitor screen.
Notes
How to Use the Camera
MOTIONDET:
If you connect an alarm device to this camera, you
can monitor activity more efficiently, because a
signal is generated by the camera whenever motion
is detected. The motion detection signal is output
through the MD OUT port.
2
Set up the mode using the 4 direction buttons.
- AREA SEL : You can select up to 8 PRIVACY areas.
- AREA MODE :
Determines whether to use the area selected in
the AREA SEL, and the size and position of the
area.
SYNC :
In areas where the supply is at 60Hz, you can
synchronize the output phase of multiple
cameras using the power synchronization
function (Line-Lock) without using a
synchronization signal generator.
- INT : Internal Synchronization Type
- L/L : Power Synchronization Type, Line-lock
❶
PresstheSETbutton.
❷
You can select a desired phase from 0 to 359 when select 'phase'.
❸
You can decide the synchronization between luminance and color signal
when select the 'mode'.
❶
WhentheSPECIALmenuscreenisdisplayed,presstheUpandDownbuttons
sothatthearrowindicates’MOTIONDET‘.
2
Set up the mode using the 4 direction buttons.
- SENSITIVITY : You can select up to 8 MD areas. When SENSITIVITY number is
high, motion detection sensitivity is increased to recognize even
small movement.
- AREA MODE : Determines whether to use the MD area selected in SENSITIVITY.
- SEL POS : Determines which of the 4 vertices of each MD area is to be used.
- YPOS : Determines the coordinate of the vertical axis for SEL POS.
- XPOS : Determines the coordinate of the horizontal axis for SEL POS.
- MASK COLOR : Determine area color. You can select Gray, Green, Red, Blue,
Black, White.
- TRANSP : Determine the transparency of selected area as controlling number
from 0 to 3.
- RETURN : Select this to save the PRIVACY menu settings and return to the
SPECIAL menu.
PRIVACY : Hide an area you want to hide on the screen.
❶
WhentheSPECIALmenuscreenisdisplayed,presstheUpandDownbuttons
sothatthearrowindicates’PRIVACY‘.
 previous next