Sony SCH-735 Digital Camera User Manual


  Open as PDF
of 25
 
COLOR CCD CAMERA User Guide
26
COLOR CCD CAMERA User Guide
27
How to Use the Camera
INDOOR :
Select this when the color temperature is between 4,500
ºK
and 8,500
ºK
.
UTDOOR : Select this when the color temperature is between 1,800ºKand
10,500ºK.(sodiumlightinclusion)
AWC →SET:
To find the optimal setting for the current luminance environment in this
mode, set the point the camera towards a sheet of white paper and press
theSETbutton.Iftheenvironmentchanges,readjustit.
MANUAL :
Select this to fine-tune White Balance manually. Set White Balance first by
using the ATW or AWC mode. After that switch to MANUAL mode, fine-
tunetheWhiteBalanceandthenpresstheSETbutton.
This camera is designed so that it delivers a distinctive subject and background at
the same time, even when the subject is in backlight, unlike conventional cameras,
by adopting a proprietary SV-IV DSP chip.
1.WhentheSETUPmenuscreenisdisplayed,select’BACKLIGHT‘byusingtheUp
andDownbuttonssothatthearrowindicates’BACKLIGHT‘.
BACKLIGHT
•WhiteBalancemaynotworkproperlyunderthefollowingconditions.Inthiscase
selecttheAWCmode.
❶
Whenthecolortemperatureofenvironmentsurroundingthesubjectisoutofthe
control range (e.g. clear sky, or sunset)
2
Whentheambientilluminationofthesubjectisdim.
3
If the camera is directed towards a fluorescent light or is installed in a place
whereilluminationchangesdramatically,theWhiteBalanceoperationmay
become unstable.
Notes
2. Select a desired mode using the Left and Right buttons depending on the camera purpose.
BLC:Enablesausertodirectlyselectadesiredareafromapicture,andtoviewthe
area more clearly.
•Select’BLC‘toadjusttheareatobeenhancedand
enhancement level.
<WDR>
<OFF>
WDR : When there are both bright and dark areas at the same time, this mode
makes both areas distinctive.
•Select’WDR‘toadjusttheWDRLIMITandLEVEL.
- LIMIT : Adjust the WDR Sensitivity by selecting
LOW,MIDDLE,orHIGH.
-LEVEL:AdjusttheWDRBrightnessbycontrolling
the bar from 1 to 100.
MAIN SETUP
1.LENS DC
2.EXPOSURE
3.WHITE BAL ATW
4.BACKLIGHT OFF
5.SSNR ON
 previous next