Filter
Top Products
2
Owner's Record
The model and serial numbers are located on the top.
Record these numbers in the spaces provided below.
Refer to these numbers whenever you call upon your
Sony dealer regarding this product.
Model No. ____________________
Serial No. ____________________
To prevent fire or shock hazard, do not
expose the unit to rain or moisture.
To avoid electrical shock, do not open the
cabinet. Refer servicing to qualified
personnel only.
Power Supply
Caution for U.S.A. and Canada
The SNC-Z20N operates on 24V AC, 12V DC or
POWER OVER LAN.
The SNC-Z20N automatically detects the power
Use a Class 2 power supply which is UL Listed (in the
U.S.A.) or CSA-certified (in Canada), or IEEE 802.3af
applied POWER OVER LAN.
Caution for other countries
The SNC-Z20P operates on 24V AC, 12V DC or
POWER OVER LAN.
The SNC-Z20P automatically detects the power.
Use a power supply which complies with the safety
regulation of the country where the unit is used, or IEEE
802.3af applied POWER OVER LAN.
For customers in the U.S.A. (SNC-Z20N
only)
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This equipment
generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference wll not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
You are cautioned that any changes or modifications not
expressly approved in this manual could void your
authority to operate this equipment.
The shielded interface cable recommended in this
manual must be used with this equipment in order to
comply with the limits for a digital device pursuant to
Subpart B of Part 15 of FCC Rules.
WARNING
This symbol is intended to alert the user to
the presence of uninsulated “dangerous
voltage” within the product’s enclosure
that may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.