Filter
Top Products
Others
Using the Supplied Setup Program
47
8
Set the primary DNS server address and, if
necessary, secondary DNS server address.
To obtain the DNS server addresses
automatically:
Select Obtain DNS server address automatically.
To specify the DNS server addresses manually:
Select Use the following DNS server address, and
type the Primary DNS server address and
Secondary DNS server address in each box.
Note
The Third DNS server address and Fourth DNS
server address are invalid for this camera.
9
Set the HTTP port number.
Normally select 80 for the HTTP port number. To
use another port number, select the text box and
type a port number between 1024 and 65535.
10
Type the Administrator name and Administrator
password.
The default settings of both items are “admin.”
11
Confirm that all items are correctly set, then click
OK.
If “Setting OK” is displayed, the IP address is
correctly assigned.
Changing the Communication
Bandwidth
1
Click the Bandwidth control tab to display the
bandwidth setting window.
The current bandwidth is displayed in Current
bandwidth.
2
Click to select the desired bandwidth from the
Setting bandwidth list box.
3
Type the Administrator name and Administrator
password in each box.
4
Click OK.
If "Setting OK" is displayed, the bandwidth setting
is completed.