Filter
Top Products
Administrating the Camera
Configuring the Network — Network setting Page
25
Primary DNS
Type the IP address of the primary DNS server.
Secondary DNS
Type the IP address of the secondary DNS server, if
necessary.
Bandwidth control
Limits the data communication bandwidth of the
camera.
You can select from among the following:
Unlimited, 0.5, 0.6, 0.7, 0.8, 0.9, 1.0, 2.0, 3.0, 4.0, 5.0,
6.0, 7.0, 8.0 (Mbps)
Select Unlimited when you do not want to limit the
bandwidth.
Notes
• If you limit the bandwidth, the camera performance
may be affected, for example, the frame rate of image
display may be reduced.
• The actual bandwidth may differ from the selected
option depending on the network environments.
OK/Cancel
See “Buttons common to every setting page” on page
17.
Wireless LAN setting Section
This section provides the menus for connecting the
camera through a wireless network, with the specified
wireless LAN card inserted into the PC card slot of the
camera.
Read the Operation Manual and Installation Guide of the
wireless LAN card together with this guide.
Verified wireless LAN adapter card
Cisco Aironet 350 Series Client Adapter: AIR-PCM352
For details on the wireless LAN card, consult your
authorized Sony dealer or the store where you purchased
the product.
DHCP
Select On to assign the IP address to the camera
automatically. When you have assigned a proper IP
address to the camera, select Off.
Note
When you set DHCP to On, make sure that there is an
DHCP server on the network.
DNS auto acquisition
When DHCP is set to On, select if the IP address of the
DNS server is assigned automatically or not. Select On
to assign the IP address of the DNS server automatically.
IP address
Type the IP address of the camera.
Subnet mask
Type the subnet mask.
Default gateway
Type the default gateway.
MAC address
Displays the MAC address of the wireless LAN card
inserted into the PC card slot of the camera. If no card
is inserted, 00-00-00-00-00-00 is displayed.
Primary DNS
Type the IP address of the primary DNS server.
Secondary DNS
Type the IP address of the secondary DNS server, if
necessary.