Filter
Top Products
Administrating the Camera
Setting the Action output — Action output Menu
52
Voice alert Tab
Set the voice alert function, to output audio from the
speaker of the camera, when an alarm is triggered by the
detection functions.
Note
Before using the voice alert function, you need to save
the audio file to the camera using the SNC audio upload
tool.
Voice alert 1, 2, 3
Up to three voice alerts can be set. Configure the
following setting for each voice.
File
Displays the name of the audio file saved in the camera.
“Not uploaded” is displayed dimly if no audio file is
saved.
To delete the audio file saved in the camera, click
Delete.
Note
Before deleting an audio file, set Voice alert 1, 2 or 3 to
Off.
Voice alert is included in the Execution Condition tab of
the Action output menu.
Test
When an audio file is saved in the camera, you can check
it by playing it back.
Click Play to play back the audio file.
Repeat
Select playback repeat time from 1 to 3.
Notes
• If voice alert is actively linked with a different alarm
type while another voice alert is occurring, the first
voice alert is cancelled and the second one is output.
• When you play back a test, do not set Voice alert in
the Execution Condition tab of the Action output
menu to Off.
• If two or three audio files are set to be output
simultaneously linked with the same alarm type,
priority is given in the order Voice alert 1, 2 then 3.
OK/Cancel
See “Buttons common to every menu” on page 19.
White LED tab
Make the setting of the Illuminator level and lighting
time of the Presence Sensor detection and White LED.
Duration
Select the White LED lighting time from 5 seconds to
30 minutes.
Tip
The lighting time will be extended if the Presence
Sensor detection is continuing.
Maximum strength
Select the White LED Illuminator level from 1 to 6.
1 is the weakest and 6 is the strongest one.
OK/Cancel
See “Buttons common to every menu” on page 19.