Filter
Top Products
Administrating the Camera
Sending an Image via E-mail — e-Mail (SMTP) Menu
59
Select the preset position from the drop-down list, then
click Add. The selected preset position is added in the
Sequence list. Repeat this procedure to specify the
preset positions in sequence.
If you specified an unnecessary preset position, click to
select it in the list and click then Delete.
To change the order in the list, click to select the preset
position and then click Up or Down.
Note
The tour cannot be set to On if no preset position is
added in the Sequence list.
OK/Cancel
See “Buttons common to every menu” on page 28.
Sending an Image via E-
mail
— e-Mail (SMTP) Menu
When you click in the Administrator menu,
the e-Mail (SMTP) menu appears.
Using e-Mail (SMTP) function, you can send an e-mail
with attached image file that has been shot linked with
an external sensor input or with the built-in motion
detection function. The image file can also be sent
periodically.
The e-Mail (SMTP) menu consists of three tabs:
Common, Alarm sending and Periodical sending.
Common Tab — Setting the e-Mail
(SMTP) Function
e-Mail (SMTP)
Select On when you use the e-Mail (SMTP) function.
Notes
• You cannot send an audio file by using the e-mail
sending function.
• The frame rate and operability on the main viewer
may be reduced while a file is being transmitted by the
e-Mail (SMTP) function.
SMTP server name
Type the SMTP server name using up to 64 characters,
or the IP address of the SMTP server.
Authentication
Select the authentication required when you send an e-
mail.
Off: Select if no authentication is required when an e-
mail is sent.