Filter
Top Products
GB
16 Installing the Camera
3 Attach the lower ceiling bracket to the
bottom of the camera using the
supplied four screws (
3M3 × 6).
Attach also the wire rope to the bottom
of the camera using the supplied
shoulder screw (3M4).
When attaching, align the screw holes
on the bottom of the camera with those
in the ceiling bracket, and set the
triangular hole in the ceiling bracket at
the front of the camera.
Tighten the screws a little bit at a time in
the numbered order shown in the
illustration. After all of the screws are
temporarily tightened in the proper
manner, securely tighten each one in
turn.
4 Insert the raised protrusions on the
lower ceiling bracket into the spaces
provided in the upper ceiling bracket,
and temporarily fix them
by turning the
camera with lower ceiling bracket
clockwise.
Wire rope
3M3×6
(supplied)
1
2
3
Ceiling
Shoulder
screw 3M4
(supplied)
4
Set the
triangular
hole at the
front of the
camera.
Lower ceiling
bracket
To attach the ceiling bracket, use only the
screws supplied with the camera. Using
other screws may damage the camera.
Caution
Upper ceiling
bracket
Lower ceiling
bracket
Ceiling