Filter
Top Products
22
filename[C:\My Documents\_upload job\3075509111\3075509111DSCP2UC\02GB-DSCP2UC\05BAS.FM]
masterpage:Left
model name1[DSC-P2]
[3-075-509-
11
(1)]
Using the zoom feature
,
Press the zoom button to
choose the desired zoom
position, and shoot your
image.
The minimum distance needed
to focus on a subject
When the zoom is set all the way to
the W side: approximately 50 cm
(19
11
/
16
inches) from the end of the lens
When the zoom is set all the way to
the T side: approximately 50 cm
(19
11
/
16
inches) from the end of the lens
•
The lens moves when the zoom feature is being
used. Be very careful not to touch the lens.
•
The zoom feature cannot be used while
shooting movies (page 78).
Shooting close-ups (Macro)
For close-ups of small subjects like flowers
or insects, shoot using the Macro feature.
You can use this feature for close-ups of
subjects up to the distances specified below.
When the zoom is set all the way to
the W side: approximately 10 cm
(3
15
/
16
inches) from the end of the lens
When the zoom is set all the way to
the T side: approximately 50 cm
(19
11
/
16
inches) from the end of the lens
4
T
W
4
T
W
1600
60min FINE
1600
60min FINE
W (wide-angle) T (telephoto)
Digital zoom
When the zoom exceeds 3×,
enlargement is carried out using digital
processing of the image. The image can
then be enlarged up to 6× using the
digital zoom feature. When the digital
zoom feature is used, image quality
deteriorates. When this feature is not
needed, set [DIGITAL ZOOM] to
[OFF] in the SET UP settings
(page 92).
•
When you are using digital zoom, you
cannot confirm the image using the finder.
•
When you are using the digital zoom
feature, the auto focus frame is not
displayed.
T
W
The T side of this line shows
the extent of digital zoom
01cov.book Page 22 Wednesday, April 3, 2002 11:17 AM