Sony Z600 Camera Accessories User Manual


 
17
Getting started
Battery
Use only the Sony Ericsson-specified Z600
battery and charger. When supplied, your
battery will not be fully charged.
Both the status bar within the battery icon in
the display and the charging indicator (red)
show the charging status.
Charging (5 °C-45 °C) is complete when
appears.
Full charging can take up to approximately
3 hours, but may vary depending on certain
conditions (for example, if your phone is
switched on or if temperature is outside the
operating range).
When your battery is completely empty, it can
take some time until the battery icon appears
during charging.
As an energy-saving measure disconnect the
charger from both the mains socket and the
phone after charging.
On exposure to high temperatures your battery
may expand slightly. This has no influence on
your safety/health and will reduce to its original
size once re-exposed to a lower temperature.
Inserting the Battery
1 Slide the battery cover down to remove.
2 Align the claws on the battery terminal with
those of the phone and press battery down.
3 Align the claws at the side of the cover with
slots of the phone and slide back into place
until the lock clicks.
2
1
This is the Internet version of the user's guide. © Print only for private use.