Filter
Top Products
33
Playback
– Basics
— Playback – Basics —
Playing back a tape
You can playback tapes recorded in the Digital8 system.*
1)
You can playback tapes recorded in the Hi8 /Standard 8 mm (analog) system.*
2)
You can monitor the playback picture on the LCD screen. If you close the LCD panel,
you can monitor the playback picture in the viewfinder.
(1) Install the power source and insert the recorded tape.
(2) Set the POWER switch to VCR*
1)
/PLAYER*
2)
while pressing the small green
button.
(3) Open the LCD panel while pressing OPEN.
(4) Press m to rewind the tape.
(5) Press N to start playback.
(6) To adjust the volume, press either of the two VOLUME buttons. The speaker
on your camcorder is silent when the LCD panel is closed.
You can control playback using the Remote Commander supplied with your
camcorder.*
3)
To stop playback
Press x.
*
1)
DCR-TRV140 only
*
2)
CCD-TRV107/TRV108/TRV308/TRV408/TRV608 only
*
3)
CCD-TRV107/TRV408, DCR-TRV140 only
3
6
254
VOLUME
1
C
A
M
E
R
A
V
C
R
O
F
F
(
C
H
G
)
POWER
REW
PLAY