Filter
Top Products
45
Advanced Recording Operations
Note (DCR-TRV140 only)
You cannot use the following functions while using the fader function. Also, you cannot
use the fader function while using the following functions:
– Digital effect
– Super NightShot
– Color Slow Shutter
– Tape photo recording
Before operating the overlap, wipe, or dot function
(DCR-TRV140 only)
Your camcorder stores the image on the tape. As the image is being stored, the indicator
flashes quickly, and the image you are shooting disappears from the screen. Depending
on the tape condition, the image may not be recorded clearly.
The date, time indicator and title do not fade in or fade out (CCD-TRV107/TRV108/
TRV308/TRV408/TRV608 only)
Erase them before operating the fader function if they are not needed.
While using the bounce function, you cannot use the following functions:
– Focus
– Zoom
– Picture effect
Note on the bounce function
The BOUNCE indicator does not appear in the following mode or functions:
– D ZOOM is activated in the menu settings
– Wide mode
– Picture effect
– PROGRAM AE
Using the fader function