Sony HDR-HC3 Camcorder User Manual


 
34
E:\SONY\2661355111\01US05BAS.fm
HDR-HC3
2-661-355-11(1)
To record in mirror mode .......... qh
Open the LCD panel qh 90 degrees to the
camcorder (1), then rotate it 180 degrees
to the lens side (2).
A mirror-image of the subject appears on the
LCD screen, but the picture will be normal
when recorded.
To use a tripod ....................... wa
Attach the tripod (optional: the length of the
screw must be less than 5.5 mm (7/32 in.))
to the tripod receptacle wa using a tripod
screw.
To use a Shoulder belt .............. qd
Attach the Shoulder belt (optional) to its
designated hook qd.
To use PB zoom ................. 2 0
You can magnify images from about 1.1 to
5 times (from about 1.5 to 5 times in still
images) the original size.
Magnification can be adjusted with the
power zoom lever 2 or the zoom
buttons 0 on the LCD panel.
1 Play back the picture you want to
magnify.
2 Magnify the picture with T (Telephoto).
3 Touch the screen at the point you want
to display in the center of the displayed
frame.
4 Adjust the magnification with W (Wide
angle)/T (Telephoto).
To cancel, touch [END].
You cannot change the zoom speed with the
zoom buttons 0 on the LCD panel.
To check the remaining battery
(Battery Info).......................... qs
Set the POWER switch to OFF (CHG), then
press DISP/BATT INFO qs. The
approximate recordable time in the selected
format and battery information appear for
about 7 seconds. You can view the battery
information for up to 20 seconds by
qg
qh
0
qd
qf
q
s
wa
w;
qj
qk
ql
2
Playback
Recording/playback
Functions used for recording/playback, etc. (Continued)