Filter
Top Products
96
Troubleshooting (Continued)
An unknown image appears on the LCD screen or viewfinder.
• The camcorder is in [DEMO MODE] (p. 79). Touch the LCD screen to cancel [DEMO
MODE].
An unknown indicator appears on the screen.
• A warning indicator or message appears on the screen (p. 107).
The image remains on the LCD screen.
• This occurs if you disconnect the DC plug or remove the battery pack without turning off the
power first. This is not a malfunction.
The buttons do not appear on the touch panel.
• Touch the LCD screen lightly.
• Press DISP/BATT INFO on your camcorder (or DISPLAY on the Remote Commander)
(p. 33).
The buttons on the touch panel do not work correctly or do not work at all.
• Adjust the touch panel ([CALIBRATION]) (p. 120).
The image in the viewfinder is not clear.
• Move the viewfinder lens adjustment lever until the image appears clearly (p. 33).
The image in the viewfinder has disappeared.
• Close the LCD panel. No image is displayed in the viewfinder when the LCD panel is open
(p. 33).
You cannot operate functions using the “Memory Stick Duo.”
• Insert a “Memory Stick Duo” into your camcorder (p. 36).
• If you use a “Memory Stick Duo” formatted on a computer, format it again on your
camcorder (p. 66).
Images cannot be deleted.
• Release the lock on the write-protect tab of the “Memory Stick Duo” if there is one (p. 116).
• The maximum number of images that you can delete on the index screen at one time is 100.
• You cannot delete the images protected on another device. Release the protection of the
images on the device which you protected the images.
LCD screen/viewfinder
“Memory Stick Duo”