Filter
Top Products
Dubbing/Editing
Dubbing/Editing
101
Setting time values
Your camcorder uses 2 types of time values:
time code values and user bits.
Setting the time code value
1 Set the POWER switch to VCR or
CAMERA.
2 Press MENU.
3 Select the (TC/UB SET) menu
by turning the SEL/PUSH EXEC dial,
then press the dial.
4 Select [TC MAKE] by turning the
SEL/PUSH EXEC dial, then press the
dial.
5 Select [PRESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
6 Set the time code value.
1 Select [TC PRESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
2 Select [PRESET] by turning the SEL/
PUSH EXEC dial, then press the dial.
3 Select the first 2 digits by turning the
SEL/PUSH EXEC dial, then press the
dial.
Set a time code between 00:00:00:00 and
23:59:59:29.
4 Repeat step 3 to set up the other digits.
5 Select [OK] by turning the SEL/PUSH
EXEC dial, then press the dial.
7 Select the frame mode.
1 Select [TC FORMAT] by turning the
SEL/PUSH EXEC dial, then press the
dial.
2 Select the frame mode by turning the
SEL/PUSH EXEC dial, then press the
dial.
8 Select the running mode.
1 Select [TC RUN] by turning the SEL/
PUSH EXEC dial, then press the dial.
2 Select the running mode by turning the
SEL/PUSH EXEC dial, then press the
dial.
POWER switch
Setting To
AUTO set the mode automatically in
accordance with the inserted
cassette
DF select the drop frame mode
NDF select the non-drop frame mode
Setting To
REC RUN advance the time code value
only while recording. Select
this when making the time cord
continuous at backspace
editing.
,continued