Filter
Top Products
Using the Menu
78
Using the (OTHERS)
menu
– CLOCK SET/WORLD TIME,
etc.
You can select the items listed below on the
OTHERS menu. For details on how to select
these items, see “Selecting menu items” (p. 57).
The default settings are marked with G. The
indicators in parentheses appear when the
setting is selected. The settings you can adjust
vary depending on the power mode of your
camcorder. The screen shows the items you can
operate at the moment. Unavailable items will
be grayed out.
ASSIGN BTN
You can assign functions to the ASSIGN buttons (p. 86).
CLOCK SET
You can set the date and time (p. 16).
WORLD TIME
You can adjust the time difference when using your camcorder abroad. Set the
time difference by turning the SEL/PUSH EXEC dial, the clock will be adjusted
in accordance with the time difference. If you set the time difference to 0, the
clock returns to the originally set time.
LANGUAGE
You can select or change the language used for the on-screen display (p. 19).
For HVR-Z1U:
You can select from English, Simplified English, or Canadian-French.
For HVR-Z1N:
You can select from English, Simplified English, Latin American Spanish,
Brazilian-Portuguese, Traditional-Chinese, or Korean.
QUICK REC
When the camcorder is left in recording standby for more than about 3 minutes,
your camcorder exits the recording standby mode (the drum stops rotating) to
prevent tape wear and battery loss. Since the power does not turn off, you can
restart recording by pressing REC START/STOP again.
OTHERS
RETURN
ASSIGN BTN
CLOCK SET
WORLD TIME
LANGUAGE
QUICK REC
BEEP
REC LAMP
[
MENU
]
:END
STBY
GOFF It takes some time to restart recording from the state that the drum has
stopped rotating, but the transition from the last recorded scene is
smooth.