Filter
Top Products
Troubleshooting
110
Dubbing
The picture appears distorted on the
4:3 TV.
• This happens when viewing a picture recorded in the 16:9 wide mode on
a 4:3 TV.
cTo play back the picture, set [DOWN CONVERT] on the (IN/
OUT REC) menu (p. 74).
cBefore recording, set [DV WIDE REC] on the (IN/OUT REC)
menu to [OFF] (p. 72).
Noises appear and is displayed
on the screen.
• On the (OTHERS) menu, change the [50i/60i SEL] setting to 50i
and playback the tape (p. 82).
appears on the LCD screen. • This appears when you play back a tape recorded on other recording
devices using a 4-channel microphone. This camcorder does not comply
with the 4-channel microphone recording standard.
Symptom Cause and/or Corrective Actions
Pictures from connected devices are
not displayed on the LCD screen or
the viewfinder.
cSet [DISP OUTPUT] to [LCD PANEL] on the (OTHERS) menu
(p. 80).
Cannot dub correctly using the A/V
connecting cable.
cSet [DISP OUTPUT] to [LCD PANEL] on the (OTHERS) menu
(p. 80).
When connected using an i.LINK
cable, no picture appears on the
monitor screen during dubbing.
cSet [VCR HDV/DV] on the (IN/OUT REC) menu according to the
requirements of the connected device (p. 70).
New sound added to a recorded tape
is not heard.
cIn the (AUDIO SET) menu, set [AUDIO MIX] to [MIX] or
[CH3,CH4] (p. 100).
Pictures disappears for a moment
when you press EXPANDED
FOCUS.
• If you press EXPANDED FOCUS during recording in the DVCAM
(DV) format while transferring pictures to the connected device, pictures
disappear when switching from the normal size to the expanded size.
Symptom Cause and/or Corrective Actions