Filter
Top Products
28
Using the data code function
Your camcorder automatically records not only images on the tape but also the
recording data (date/time or various settings when recorded) (Data code). Use the
Remote Commander for this operation.
Press DATA CODE on the Remote Commander in the playback mode.
The display changes as follows:
date/time t various settings (SteadyShot, exposure AUTO/MANUAL, white balance,
gain, shutter speed, aperture value) t no indicator
[a] SteadyShot off indicator
[b] Exposure mode indicator
[c] White balance indicator
[d] Gain indicator
[e] Shutter speed indicator
[f] Aperture value
Not to display various settings
Set DATA CODE to DATE in the menu settings (p. 79).
The display changes as follows:
date/time t no indicator
Notes on the data code function
•The data code function works only for tapes recorded in the Digital8 system.
•Various settings of the recording data are not recorded when recording images on
“Memory Stick” (DCR-TRV330/TRV530 only).
To display the screen indicators – Display function
Press DISPLAY on your camcorder or the Remote Commander supplied with your
camcorder.
The indicators appear on the screen.
To make the indicators disappear, press DISPLAY again.
Playing back a tape
DISPLAY
[a]
[b]
[c]
[d]
[e]
[f]
Various settings
60 AWB
F1.6
9dB
AUTO
0:00:23:01
40min
Date/time
JUL 4 2001
12:05:56 AM
0:00:23:01
40
min