Filter
Top Products
54
During playback, you can process a scene using the digital effect functions: STILL,
FLASH, LUMI. and TRAIL.
(1) Press MENU to display the menu settings in the playback mode.
(2) Turn SEL/PUSH EXEC dial to select
, then press the dial.
(3) Turn SEL/PUSH EXEC dial to select D EFFECT, then press the dial.
(4) Turn SEL/PUSH EXEC dial to select the desired digital effect mode, then press
the dial. The bars appear on the screen. In the STILL or LUMI. mode, the image
where you press the SEL/PUSH EXEC dial is stored in memory as a still
image.
(5) Turn the SEL/PUSH EXEC dial to adjust the effect.
For details of each digital effect function, see page 41.
To cancel the digital effect function
Set D EFFECT to OFF in the menu settings.
Notes
•The digital effect function works only for tapes recorded in the Digital8 system.
•You cannot process externally input scenes using the digital effect function.
•You cannot record images that you have processed using the digital effect function
with this camcorder. To record images that you have processed using the digital effect
function, record the images on the VCR using your camcorder as a player.
Pictures processed by the digital effect function
Pictures processed by the digital effect function are not output through the DV IN/OUT
jack.
When you set the POWER switch to OFF (CHG) or stop playing back
The digital effect function is automatically canceled.
Playing back a tape with digital effects
2
5
3,4
MANUAL SET
OFF
STILL
FLASH
TRAIL
DEFFECT
[
MENU
]
:
END
LUMI
.
MANUAL SET
DEFFECT
[
MENU
]
:
END
LUMI
.
IIIIIIII
••••••••
MENU