Filter
Top Products
90
Inserting “Memory Stick”
Insert a “Memory Stick” in the “Memory Stick” slot as far as it can go with the v mark
facing toward the “Memory Stick” slot as illustrated below.
To eject the “Memory Stick”
Press the “Memory Stick” eject button. The “Memory Stick” pops up.
When the access lamp is lit or flashing
Do not shake or strike your camcorder because your camcorder is reading the data from
the “Memory Stick” or recording the data on the “Memory Stick”. Do not turn the
power off , eject the “Memory Stick” or remove the battery pack. Otherwise, the image
data breakdown may occur.
If “ MEMORY STICK ERROR” is displayed
The “Memory Stick” may be corrupted. If this occurs, use another “Memory Stick.”
Using “Memory Stick”–introduction
“Memory Stick” slot
Access lamp
“Memory Stick” eject button