Filter
Top Products
Specifications
33
Specifications
Specifications
XCD-V60/V60CR XCD-SX90/SX90CR XCD-U100/U100CR
Image sensor 1/3-type progressive scan IT
transfer CCD
1/3-type progressive scan IT
transfer CCD
1/1.8-type progressive scan IT
transfer CCD
Number of effective pixels Approx. 330,000
659 (H) × 494 (V)
Approx. 1,200,000
1296 (H) × 966 (V)
Approx. 2,000,000
1628 (H) × 1236 (V)
Cell size 7.4 (H) × 7.4 (V) µm 3.75 (H) × 3.75 (V) µm 4.4 (H) × 4.4(V) µm
Chip size 5.79 (H) × 4.89 (V) mm 6.26 (H) × 5.01 (V) mm 8.50 (H) × 6.80 (V) mm
Interface format IEEE1394b-2002
Transfer speed 800, 400 Mbps
Protocol IIDC 1394-based Digital Camera Specification Version 1.31 Compliant
Image format (fixed size) 640 × 480 Mono8/16 1280 × 960 Mono8/16
1024 × 768 Mono8/16
800 × 600 Mono8/16
640 × 480 Mono8/16
1600 × 1200 Mono8/16
1280 × 960 Mono8/16
1024 × 768 Mono8/16
800 × 600 Mono8/16
640 × 480 Mono8/16
Frame rate (depends on the
image format)
90 to 1.875 fps 30 to 1.875 fps 15 to 1.875 fps
Image format (Format7)
(* for Partial scan)
680 × 480 Mono8/16*
320 × 240 (Binning)
640 × 240 (Binning)
640 × 480 (90 fps)
1280 × 960 Mono8/16*
640 × 480 (Binning)
1280 × 480 (Binning)
1600 × 1200 Mono8/16*
800 × 600 (Binning)
1600 × 600 (Binning)
Partial scan function Minimum unit: 32 × 24
Trimming position selectable by the unit of 4 × 4
Lens mount C-mount
Flange back 17.526 mm
Minimum illumination Black and white model: 2 lx
(Iris: F1.4, Gain: +24 dB, Shutter:
1
/60s (129) (XCD-V60),
1
/30s (182) (XCD-SX90),
1
/15s (258)
(XCD-U100))
Color model: 20 lx
(Iris: F1.4, Gain: +18 dB, Shutter:
1
/60s (129) (XCD-V60CR),
1
/30s (182) (XCD-SX90CR),
1
/15s
(258) (XCD-U100CR))
Brightness Adjustable
Gamma Adjustable using the Lookup table
Shutter speed 1/100,000 to 16 s
(Absolute value control possible)
Gain Auto/Manual (Black and white model: 0 to 24 dB / Color model: 0 to 18 dB)
External trigger shutter Edge detection (Mode0), Exposure time setting by trigger width (Mode1), Software trigger
(IEEE1394 bus), Bulk trigger, Sequential trigger, Trigger inhibition setting, Trigger/strobe delay
setting
Power supply +8 to +30 V (from IEEE1394b cable or 12-pin connector)
Power consumption 2.8 W (12 V) 2.8 W (12 V) 3 W (12 V)
Performance guaranty
temperature
0 to +40 °C (32 to104 °F)
Operating temperature –5 to +45 °C (23 to113 °F)
Storage temperature –30 to +60 °C (–22 to +140 °F)
Operating relative humidity 20 to 80 % (No condensation)
Storage relative humidity 20 to 95 % (No condensation)
Vibration resistance 10 G (20 to 200 Hz, 20 minutes for each direction X, Y, Z)
MTBF 57170 Hrs (Approx. 6.5 years) 58260 Hrs (Approx. 6.7 years) 56270 Hrs (Approx. 6.4 years)
Shock resistance 70G
Dimensions 44 (W) × 33 (H) × 57.5 (D) mm, not including projecting parts
(1 3/4 (W) × 1 5/16 (H) × 2 3/8 (D) inches)
Mass 140 g (5 oz)