Filter
Top Products
Chapter 6 Menu Displays and Detailed Settings
101
6-4 Resetting USER Menu Settings to the Standard Settings
Setting the CCD scan mode to the
progressive scan mode
The scan mode of the camcorder has been set to the
interlace scan mode at the factory. The FORMAT page of
the OPERATION menu allows you to change the CCD
scan mode to the progressive scan mode.
1
Follow the procedures given in steps 1 to 3 described
in 6-3-4 “Specifying an Offset for the Auto White
Balance Setting” on page 96, to display the FORMAT
page of the OPERATION menu.
2
Turn the MENU knob to move the b mark to “SCAN
MODE”, and press the MENU knob.
The b mark on the left of “SCAN MODE” changes to
a z mark and the z mark on the left of the setting
changes to a ? mark.
3
Turn the MENU knob to display “PsF”, and press the
MENU knob.
The z mark changes to a b mark and the ? mark on the
left of the SCAN MODE changes to a z mark.
4
To end the menu operation, set the MENU ON/OFF
switch to OFF or close the cover of the menu operating
section.
6-4 Resetting USER
Menu Settings to the
Standard Settings
You can return all settings in the USER menu to the
standard settings. It is also possible to change the standard
settings from their factory default values.
For details on how to change the factory settings, refer to
the Maintenance Manual.
To reset all settings to the standard settings, proceed as
follows.
1
Set the MENU ON/OFF switch to ON.
The last accessed menu appears on the screen.
2
Turn the MENU knob until the USER FILE page
appears, and press the MENU knob.
USER FILE page
3
Turn the MENU knob to move the b mark to “USER
PRESET”, and press the MENU knob.
The message “LOAD OK? YES b NO” appears.
4
Turn the MENU knob to move the b mark to”YES”,
and press the MENU knob.
The settings for all items in the USER menu are reset
to the standard settings.
19 FORMAT
16:9/4:3 SELECT : 16:9
SCAN MODE :? I
UC/J SELECT : UC
19 FORMAT
16:9/4:3 SELECT : 16:9
SCAN MODE : PsF
UC/J SELECT : UC
U16 USER FILE
USER FILE LOAD : EXEC
USER FILE SAVE : EXEC
F.ID :
sssssssssssssssss
USER PRESET : EXEC
U16 USER FILE
LOAD OK? YES NO
USER FILE LOAD : EXEC
USER FILE SAVE : EXEC
F.ID :
sssssssssssssssss
USER PRESET : EXEC