Filter
Top Products
1-10
Step 1 : Switch off SIP Camera by disconnecting the power cable.
Step 2 : Using a suitable pointed object, press and continue to hold the Reset
Button. While continuing to hold the reset button, reconnect the power cable.
Step 3 : Keep holding the reset button for 6 seconds, release the reset button.
The unit will start up with factory default settings.
⑦ Video test port : Second Video Test output
⑧ OSD control joystick
⑨ Action LED Indicator : The LED will light up after SIP Camera has
successfully completed the boot process.
⑩ DIP Switch (Baud rage & Address setting) :
Please refer to the 2.4.5 for more descriptions
⑪ LED Light level controller
⑫ Digital Input / Transistor Output