Filter
Top Products
2-73
The default setting is BLANK.
Press any number from 001~255 with preset button on password blank
and again it on confirm blank. Then “CONFIRMED” is displayed on the
monitor and the menu will go back to the previous page automatically.
<CONFIRMED> <CANCELLED>
If user presses wrong preset number between PASSWORD and
CONFIRM, “CANCELLED” is displayed on the monitor and if user failed 3
times, the menu will return to the previous page automatically * After
setting a Password, an operator must press memorized password in
order to enter OSD MAIN MENU, or to change the data which is
memorized originally.
* An operator must remember the password for the operation.
Manufacturer does not provide a memorized password.
A-8-3. DOME SET – [NEXT PAGE] – [OSD DISPLAY]
OSD ID displayed after set ON in here and it can be hiding if selected
OFF. Move five keys to the right or left direction in order to select
OFF/ON when the cursor is located each item.
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CANCELLED
ENTER PASSWORD
BY ENTERING PRESET CODE
PASSWORD ***
CONFIRM ***CONFIRMED