Filter
Top Products
2-49
2.4.3 Operating Camera OSD Menu
z STEP 1: Press the Set button to access the SETUP mode.
SETUP menu is displayed on the monitor screen.
z STEP 2: Select the desired feature using the UP or DOWN button.
Each time you press the UP or DOWN button, the arrow indicator
moves up or down.
Move the arrow indicator to the desired feature item.
z STEP 3: Change the status of the selected feature using the LEFT or
RIGHT button.
If you press RIGHT or LEFT button, it appears available status.
Press the button when gets desired feature.
z STEP 4: When competed, move the arrow indicator to ‘EXIT’ and
press the SET button.
NOTE: You can access submenu using SET button.
For the mode with ‘---‘, you may net access submenu.